Deflection, deformation, waviness
If objects are loaded with a weight or moved free-standing over a certain distance, a smaller or larger warping of the object always occurs. Measuring this deflection can be accomplished for larger objects using all possible distance sensors. On the other hand, if the deflection of a small slab should be measured, high precision measuring systems like those developed by Micro-Epsilon are necessary for this. Deflections from the meter range down to trillionths of a meter can be measured at Micro-Epsilon.
Monitoring the clamping position of tools
Often, initiators and switching rings, which provide a switching signal, are used to monitor the clamping position in high-performance tool machines. However, these require complex adjustment and ...
Show detailsDeflection/cambering of steel strips and saw blades
In the production and processing ne of metal strips, numerous measurement variables need to be monitored, e.g. straightness, cambering and deflection. The inspection of these quantities is carried out ...
Show detailsSystem for testing the risk of creaking with combinations of materials
Ziegler Instruments in Mönchengladbach, Germany develops and manufactures test systems that are able to predict the risk of creaking noises due to stick-slip vibrations. In this way, the ...
Show detailsDeflection of rotor blades
Mechanical loads on wind turbine rotor blades are measured using a test rig at the Fraunhofer Institute IWES, Bremerhaven. The rotor blades are mounted on the test rig and adjusted using cable winches. ...
Show detailsPlanness measurement of display glass
Thinnest glass of outstanding flatness is required for the production of displays for telecommunications equipment. During glass production measuring and monitoring of the flatness is a decisive factor ...
Show detailsFlatness inspection on ceramic wall tiles
In the production of ceramic wall tiles or similar products, a one hundred percent quality inspection is essential. Three laser triangulation displacement sensors measure the deflection of tiles with an ...
Show detailsFlatness measurement in rolling mills
The requirements on the surface quality of rolled sheet metal are continually increasing. This may be steel sheet which is used, for example, for stainless steel fronts in kitchens, or also aluminum sheet ...
Show detailsLoad tests on airplane wings
In order to optimize the behavior of wings during a flight, the wings are already subjected to vibration tests during the construction. 120 wireSENSOR draw-wire sensors are connected to the wing and synchronized. ...
Show details